Hot Water Heater Installation in Acworth

Most homeowners don’t think much about their hot water heaters until they go out, but nothing upsets the homes harmony than having no hot water.  Serv’All Plumbing and Drain Cleaning does more than just plumbing and often people don’t know that we specialize in Hot Water Heater Installation in Acworth, GA and surrounding north Atlanta metro areas.

Hot water heaters don’t have as long of a lifespan as you might think and typically last anywhere from 7-12 years.

New home owners often think their hot water heater is good just because the initial home inspection didn’t report any issues with the hot water heater but it’s recommended that you have a licensed plumber inspect your hot water heater to let you know if there are any issues with your hot water heater or what you can do to prevent any potential issues with your hot water heater.

How To Pick a Hot Water Heater?

Determining the proper size and fuel type of your hot water heater are going to be the two most important factors in the price of the unit.

To learn more about figuring out what size water heater you need, especially if you’re switching from conventional tank to a tankless hot water heater you should contact us for a free consultation regarding the option of hot water heater for your home.

The most common fuel types for water heaters are:

  • Electric Hot Water Heater
  • Gas Hot Water Heater
  • Oil or Propane Hot Water Heater
  • Heat Pump or Hybrid Hot Water Heater
  • Solar Hot Water Heater
  • Tankless Hot Water Heater

The fuel type will also affect the purchase price for new hot water heater and also the installation cost of the unit.

How Much Does it Cost to Replace a Water Heater?

Electric water heaters are some of the most affordable units around as far as installation costs are concerned. You can get a cheap conventional tank unit for a few hundred dollars. Although, the units can range to a few thousand dollars depending on size, quality, and features that you select.

You can estimate 50% of the cost of your water heater for the labor costs. Sometimes it can be cheaper than that, but it’s better to overestimate rather than under when you’re budgeting.

Electric conventional tank water heaters are among the most inefficient though. Up to 25% of your power bill comes from your water heater, so you’ll want to keep that in mind when thinking about fuel source.

Gas units are going to be more expensive than electric units of similar size. They run more efficiently than electric units though so the upfront cost can be recuperated with savings down the road.

The installation is about the same level of difficulty as installing an electric model of the same style so you won’t have higher labor costs. Only the equipment costs more upfront.

You can find conventional tank gas units for $900 for a 40-gallon unit.

Tankless gas water heaters start at $1,000 and go up front there. If you’re installing a tankless model, remember that you will have higher labor costs than installing a conventional tank model of that same fuel type.

If you’re thinking of replacing a conventional tank gas water heater with a tankless gas water heater, you might want to consider a condensing water heater.

The equipment is comparable to the cost of tankless units, but the installation is more similar to a conventional tank model, so you don’t have the higher labor costs. Condensing water heaters look much like conventional tank units, but they run the fuel in a different and more efficient way – which translates to savings for you!